Your Cart
Elementor Email Deliverability

How to Configure Elementor Email Deliverability, Custom Domains, Logs and Failed-Email Troubleshooting

Elementor Email Deliverability provides a documented workflow for connecting site email, configuring sending settings, testing messages and reviewing delivery information in WordPress. For website owners, this is especially useful when Elementor form emails appear not to arrive or when a site needs a custom sending domain.

The process combines several separate checks: the connection inside WordPress, DNS verification, domain authentication, test messages and email logs. This article follows Elementor’s documented workflow. Depending on the installed product, subscription context or interface version, labels may differ between Email Deliverability, Elementor One and the former Site Mailer naming.

What Elementor Email Deliverability Does

The workflow is designed to manage site emails, including messages generated by Elementor forms. After connection, the documented dashboard includes Email Logs, General Settings and Suppressions. These areas support configuration, controlled testing, review of delivery information and management of addresses that should not receive messages.

An email status should be treated as evidence about the sending workflow, not as a universal guarantee of inbox placement. A documented Delivered status does not prove that the message appeared in the recipient’s inbox rather than spam, quarantine or another filtered folder. Elementor’s documentation also does not cover every possible issue involving hosting environments, firewalls, DNS providers, caching layers or recipient mail systems.

Sending, authentication and logging are separate checks

Sending configuration, DNS authentication and log-based diagnosis answer different questions. A connected service does not by itself confirm that a custom domain is verified. A verified domain does not prove that every recipient provider will place messages in the inbox. Similarly, a log entry should be read together with its status, failure reason and the configuration state that existed when the message was sent.

Use the logs as a practical diagnostic record, while protecting recipient addresses and any form-submission content they may contain.

How to Set Up Elementor Email Deliverability

The initial setup starts in the WordPress admin area. Install and activate Email Deliverability, then open Elementor > Email Deliverability and select Connect. This begins the documented connection workflow. After connecting, review the available dashboard areas before testing a live form.

Initial configuration checklist

  1. Confirm that Email Deliverability is installed and activated.
  2. Open Elementor > Email Deliverability in WordPress admin.
  3. Select Connect and complete the connection flow shown by the installed product.
  4. Review General Settings, Email Logs and Suppressions.
  5. Review sender-related options in General Settings.
  6. Consider enabling the option to show email content in logs when detailed troubleshooting and failed-message resending are needed.
  7. Send a test email before relying on a live form submission as the only verification.

Detailed logging can make records more useful because it allows the email text to be viewed and supports resending failed emails. It can also expose message content and recipient information, so access to logs should be handled carefully. Do not publish credentials, API keys or private log contents while diagnosing a site.

How to Connect a Custom Sending Domain

To use the documented custom-domain workflow, open General Settings and choose Add Custom Domain. Enter the domain and, where supported by the displayed workflow, an optional sender name. Elementor then provides the DNS information needed for verification.

DNS verification without replacing unrelated mail records

Copy the CNAME host and value entries generated by Elementor into the DNS panel of the provider responsible for the domain. Do not invent fixed values or assume that the field names are identical at every provider. DNS interfaces differ, so use the exact host and value information displayed in your account.

Where a provider offers proxied CNAME records, Elementor’s documentation instructs users to use DNS-only mode for applicable records. After saving the records, return to Elementor and start verification. Elementor notes that verification may take up to 72 hours, so an immediate failure does not necessarily mean that the generated values are incorrect.

Keep these CNAME records separate from unrelated mail configuration. Do not delete or replace existing SPF, DKIM, DMARC or MX records without confirming which other website, business or transactional email services use them. Incorrect DNS changes can affect legitimate sending or receiving. When several services share a domain, coordinate the change with the domain or email administrator and verify the records at the authoritative DNS provider.

SPF, DKIM and DMARC: What They Mean Here

Elementor describes SPF, DKIM and DMARC as authentication mechanisms relevant to domain-based email sending. Understanding their roles helps separate an authentication issue from a problem that occurs later at the recipient’s mail system.

Authentication concepts to check during troubleshooting

  • SPF concerns authorizing sending servers for a domain.
  • DKIM adds a cryptographic signature that can be validated through DNS.
  • DMARC defines handling for authentication failures and checks alignment between the visible From domain and authenticated domains.

These concepts should be reviewed together with the custom-domain configuration and the DNS records generated by Elementor. They are configuration checks, not a promise of inbox placement. Before changing authentication records, review the existing domain setup and confirm whether other sending services depend on it. Avoid deleting records simply because a new service also needs domain authentication.

How to Test Elementor Form Email Delivery

After the initial connection and configuration, send a test email from the Email Deliverability settings screen. Enter the destination address supported by the test-email workflow and send the message. The test message appears in the email log. Its text is visible there only when email logging is enabled.

Test before changing multiple variables

Use the test as a controlled checkpoint before changing DNS or other settings unnecessarily. Check the target mailbox, but remember that a message can be filtered into spam, quarantine or another folder. Then match the result with the related Email Logs entry and note the displayed status and any failure reason.

A successful test does not prove that every live form, recipient or provider will behave identically. Conversely, a failed test gives you a more focused starting point than a live submission involving several unknown variables. Avoid sharing the test address or any private message content publicly.

Failed Email Logs and Resending Messages

Open Email Logs within Email Deliverability to review messages. Documented log information includes the recipient, source, status and sent date. Filters can help focus on recent periods, delivery totals or failed messages. For a failed entry, inspect the displayed failure reason before deciding what to do next.

Reading a failed log entry

  1. Locate the message using the recipient, source or sent date.
  2. Review its status and the displayed failure reason.
  3. Check whether detailed logging is enabled if message content is needed.
  4. Correct the relevant configuration or domain issue before retrying.
  5. Use the documented resend control only after reviewing the reason and deciding that another attempt is appropriate.

Elementor documents controls to resend or delete failed messages. Detailed content and resend functionality depend on the relevant logging option. Statuses may not update immediately: the explored log interface documents periodic status updates every 12 hours, and logs are documented as being kept for 30 days. These are product-specific details that may change over time, so do not interpret a delayed status as definitive evidence of a new failure.

Elementor Form Emails Not Delivered: Troubleshooting Checklist

When an Elementor form email is not delivered, use a staged process rather than changing several settings at once. Start with the documented test email, then connect the result to the corresponding log entry. This keeps the investigation based on information visible in the installed workflow.

  • Send a test email from Email Deliverability.
  • Open Email Logs and review the status, source, recipient and failure reason.
  • Confirm that detailed logging is enabled if message text or resend controls are required.
  • Check the custom-domain CNAME records and their verification state at the actual domain provider.
  • Review SPF, DKIM and DMARC concepts, including alignment, without replacing existing records blindly.
  • Open Suppressions and check whether the recipient address is listed there.
  • Retry only after addressing the issue indicated by the available configuration or log information.

When the Elementor log does not explain the problem

Elementor’s documented logs are useful, but they do not provide a universal matrix for every hosting, firewall, DNS-provider, caching-layer or recipient-mailbox problem. If the log does not explain the issue, first recheck the documented connection, logging option, custom-domain verification and authentication configuration. Confirm that the exact generated DNS values were entered at the authoritative provider and that unrelated mail records remain intact.

Also remember that a delivery status and inbox placement are different outcomes. A message may be accepted and later filtered by the recipient system. Do not repeatedly resend messages without understanding the available failure information, and do not expose personal data while reviewing or sharing logs. When multiple sending services use one domain, involve the responsible domain or email administrator before making further DNS changes.

In practice, the clearest order is to connect Email Deliverability, review General Settings, enable appropriate logging, verify the custom domain through Elementor-generated CNAME records, understand SPF, DKIM and DMARC checks, send a test email and then use Email Logs, failure reasons and Suppressions to guide any retry. This approach stays within the documented workflow without promising universal delivery or inbox placement.

Protect log content and preserve existing mail configuration while troubleshooting. If the available status still does not explain what happened, treat the boundary between Elementor’s documented information and external recipient filtering as significant. Explore our WordPress plugins, WooCommerce extensions, themes and membership plans to find the right tools for your website.

Free Worldwide shipping

You can download the products right away at wpbetterplugins.com

Immediate delivery

After the payment is credited, the product is ready for download

International Warranty

Offered in the country of usage

100% Secure Checkout

Stripe / Apple Pay / Google Pay / MasterCard / Visa

Zadzwoń