Elementor global layout settings determine the starting point for important page and container decisions. Instead of configuring every new page from the beginning, you can define site-wide defaults in the Editor’s Site Settings > Layout panel. These defaults cover content width, container padding, gaps, the page title selector, the target for stretched sections and the default page layout.
Those settings are useful for maintaining a coherent structure, but they are not universal design values and do not replace page-level or theme-level controls. An individual container can use different layout settings, while the active theme can still control the header, footer, sidebar, title markup or the element that restricts page width. This guide explains how to configure the defaults deliberately, choose between Canvas and Full Width, and investigate layout problems before changing theme CSS or adding another plugin.
What Elementor Global Layout Settings Control
Elementor’s global layout controls are available in the Editor under Site Settings > Layout. The panel establishes defaults for several parts of the page structure: the default content width for boxed containers, container padding, gaps between items, the page title selector, the fit target for stretched sections and the default page layout.
Elementor uses these defaults when new pages are created. That makes the panel an important part of the initial configuration of a website. It also means that a site-wide change should be deliberate. A new default may alter the starting point for future pages, but it should not be treated as a promise that every existing page will be reformatted identically. Existing pages may contain page-level choices, individual container settings or theme behavior that changes the final result.
Global defaults versus page-level choices
Use global settings to define the baseline for new pages, then check the individual page whenever its result differs from that baseline. Page-level layout choices can determine whether the page follows the theme, uses Elementor Canvas or uses Elementor Full Width. Individual containers have their own layout behavior as well, so a page may appear too narrow or too wide even when the global values seem correct.
A practical troubleshooting order is to review the global defaults first, then the page-level layout, and finally the settings of the container that displays the problem. This separates a site-wide default from an intentional local override.
Content Width, Container Padding and Gaps
Content Width, Container Padding and Gaps should be configured as one system. Content width determines the available content area, padding creates space between a container’s border and its contents, and gaps separate sibling items such as columns, widgets or nested containers.
Elementor describes 1140 pixels as a commonly used desktop content-width setting, but this is an example of common practice rather than a universal requirement. The appropriate value depends on the active design and should be checked at the available responsive breakpoints. The same principle applies to padding and gaps: documented examples or defaults should not be copied as mandatory values for every website.
How the three controls work together
Start with the width of the content area you want inside boxed containers. Then use padding to keep content away from the container edges. When the values are unlinked, Elementor allows separate settings for the top, bottom, right and left sides. This is useful when the design needs different edge spacing or when a responsive layout requires a more careful adjustment.
Gaps define the automatic space between items in containers. Elementor documents that gaps can use pixel, percentage or viewport-width units. The documented default Elements Gap is 20px unless it has been changed in Site Settings > Layout, but that value is not a universal recommendation.
Remember that a gap consumes available space. If two non-wrapping items use percentage widths and a gap is added between them, keeping both children at a full 50/50 split may cause wrapping or an overflow-like result. Check the child widths and the available space rather than assuming that the original percentages will remain suitable after introducing a gap.
Boxed and Full Width container behavior
The meaning of a width control depends on the container’s layout mode. In a Boxed container, content width controls the width of the content inside the container. In a Full Width container, the width behavior concerns the container itself differently from the boxed content setting.
This distinction explains why changing a global content-width value may not solve a page that appears too narrow. Inspect the individual container and determine whether it is set to Boxed or Full Width. Then review its own width, padding and gap settings. A global default provides a starting point, but the local container mode can change the visible result.
Choosing a Default Page Layout
The default page layout determines which structure new pages begin with. Elementor provides options that can preserve the active theme’s behavior or intentionally change which theme-controlled elements appear. The choice should reflect the type of pages normally created on the website, not a general assumption that one option is better.
Before applying a site-wide default, decide whether new pages should retain the theme header, footer, content area and sidebar. If those elements are expected but Canvas is selected unintentionally, newly created pages may start without the navigation or branding structure visitors normally see.
Default, Theme, Canvas and Full Width at a glance
Canvas displays only Elementor-created page content. It omits the theme header, footer, content area and sidebar, so it suits an intentionally standalone page structure. Full Width allows Elementor content to span the available width while retaining the theme header and footer.
Default or Theme can preserve layout behavior controlled by the active theme. These choices are useful when the page should remain integrated with the theme’s normal structure. The right option depends on which components the page must retain and how the active theme handles them.
Because the default page layout affects new pages, verify the result against the active theme before adopting it as a site-wide starting point. A page-level choice can be more appropriate when only one page needs a different structure.
Canvas vs Full Width: Page-Level Use Cases
Canvas and Full Width are most useful when selected for a specific page whose structure differs from the site-wide default. A page-level choice lets you solve a local layout requirement without changing the starting layout of every future page.
Choose Canvas when the page should contain only Elementor-built content and should omit the theme header, footer, content area and sidebar. This can be suitable for an intentionally standalone layout, but the decision should be based on the page’s required structure rather than on a general preference.
Choose Full Width when Elementor content needs to use the available width while the theme header and footer must remain visible. Keep a regular page on Default or Theme when it needs the theme-controlled structure. After selecting the layout, check the rendered page instead of assuming that the option alone will resolve every width issue.
Matching the layout to the page structure
Before changing a page-level setting, list the elements that must remain visible: navigation, header, footer, sidebar or other theme-controlled components. If the page must omit them, Canvas may match the intended structure. If the page must retain the header and footer while allowing wider Elementor content, Full Width may be the relevant choice.
Use a page-level override when the different structure is limited to one page. Compare that page with a regular page using the site-wide default. This makes it easier to identify whether the difference comes from the selected layout or from a container, theme restriction or page-level override.
Fixing Page Title and Full-Width Problems
Some layout problems are caused not by content width or padding, but by the way the active theme marks up titles and limits the page width. Elementor includes settings for identifying the page-title element and for specifying the target used when sections are stretched. These controls must match the theme’s actual markup.
Do not enter an arbitrary selector or HTML tag simply because it appears to solve a visual problem. First inspect the rendered page and the relevant theme markup. Then update the Elementor setting only when the markup confirms which selector or element is required.
When Hide Title does not work
The Page Title Selector tells Elementor which theme element represents the page title. h1.entry-title is a common example, but it is not a universal selector. If the active theme uses another element, class or selector, the Hide Title control may not work until the correct value is configured.
When the title remains visible, inspect the title element in the rendered page and compare it with the selector configured in Site Settings > Layout. Update the selector only after confirming the theme’s actual markup. A wrong selector can leave the title visible and make the control appear ineffective.
When stretched sections remain constrained
The Stretched Section Fit To setting matters when the theme limits page width through a specific HTML element. Elementor notes that body is commonly used, but a theme may use a different limiting element. If the configured target does not match the theme’s structure, a section intended to stretch may remain constrained.
Identify the element that actually limits the page width, compare it with the configured fit target, and change the setting only when the markup confirms the required value. Then recheck the page. Do not assume that every theme uses body or the same width-limiting structure.
A Responsive Testing Checklist
Global layout settings should be verified as a workflow, not accepted solely because the desktop editor looks correct. Width, padding, gaps, page layout and theme markup interact. A small change in one area can alter wrapping, edge spacing or the visibility of theme-controlled elements.
- Review the global defaults before building new pages.
- Check content width, container padding and gaps at desktop, tablet and mobile breakpoints.
- Look for wrapping or unexpected width behavior after adding gaps to percentage-based layouts.
- Confirm that the selected page layout produces the required header, footer, content area and sidebar behavior.
- Inspect individual container settings when a page does not follow the global baseline.
- Check Elementor and page-level settings before changing theme CSS or adding extra plugins.
Final verification before publishing
Before publishing, create or review a representative page using the intended default. Confirm that the content area has the expected width, that padding separates content from container edges, and that gaps do not force unwanted wrapping. Review the page at the available responsive breakpoints rather than relying on one viewport.
Also confirm that the chosen layout retains or removes the theme elements intentionally. If a title cannot be hidden or a stretched section remains constrained, inspect the theme markup and compare it with the Page Title Selector or Stretched Section Fit To setting. This verification helps distinguish a genuine theme interaction from a local container override.
Elementor global layout settings are defaults, not universal design values. Content width establishes the boxed content area, padding controls its inner breathing room, and gaps separate items while consuming available space. Canvas removes theme-controlled page elements, whereas Full Width retains the theme header and footer while allowing wider Elementor content. Default or Theme can preserve the active theme’s normal structure. When titles or stretched sections behave unexpectedly, inspect both Elementor settings and the theme markup. Finally, verify global defaults, page-level choices and container behavior at responsive breakpoints. Explore our WordPress plugins, WooCommerce extensions, themes and membership plans to find the right tools for your website.